Hazardous Location Lighting
Class 1 Division 2 Area Lighting
Powko offers one of the only hazardous area offshore light towers on the market. This light tower has a galvanized mast, frame, and skid. It also has stainless steel cabinets to combat the corrosive offshore environment. It includes every specification required to make this light tower approved for hazardous areas. Powko is the industry’s first choice for quality light towers and we always have the right light tower to get the job done, even if the job is 100 miles off the coast in the salt water!
- Features
- Specifications
- Dimensions
- Parts
- Warranty
- Downloads
In addition to Powko’s standard features, the Hazardous Location package comes with enhancements for key components that enable Powko’s light towers to endure and excel in hazardous work environments. Some of the key features are listed below.
- Hazardous/Explosion Proof Light Fixtures
- Hazardous/Explosion Proof Connector Ends Throughout
- Heavy Duty Hazardous/Explosion Proof Light Switches
- Heavy Duty Custom Light Mounting Brackets to Accommodate Heavier Lights
- Equipped with Twist Lock Auxiliary Convenience Receptacles
- Equipped with Battery Box Enclosure
- Equipped with Spark Arrester Muffler with Welded Ends For Durability and Leak Proof Operation
- Equipped with Exhaust Blanket on Muffler & Pipe
- Equipped with Front Mounted Out/In Riggers In Addition to the Standard Rear Assemblies for Greater Stability
- Optional Emergency Shut Down Provision
If you have special requirements, contact us for information & pricing! Toll Free - 1-888-363-6380
ENGINES
- Caperpillar GJ318-7060N 3-cyclinder
- Full flow oil filter, dry cartridge air filter
- Emergency Stop
- 25 gallon fuel tank
- Drip Pan
LIGHTS
- (4) 1000 Watt class 1- Division 2 square 400W metal halide light fixtures
- Tempered glass lens with silicone gaskets
- Weatherproof wire connections and receptacle boxes
BOOM
- Galvanized 30’ fully extended mast
- Dual manual winches for single person operation
- 360º rotation on mast
- Forklift pockets for lifting
- 48 in. coiled boom cord
- Mast lockable in upright position and nesting position for travel and safety
CABINET (Illumatior Style)
- 12 guage all stainless steel w/ stainless steel door hinges and hardware
- Sound reduction air-inlet baffles, quite type muffler
- Fully surrounded galvanized square tubing cage
ELECTRICAL SYSTEM
- 6 Kw Mecc Alte Generator end
- 14/3 fixture cords with 3/4" AL2 CGB's with explosion proof plugs, 20 Amp
- Explosion-proof 120 volt, 20 Amp receptacles
- Retractable cord with strain relief cord grip on junction box
- Plastic loom on all exposed cords inside cabinet and ballast box
- Dual explosion proof fixture switches
- 20 Amp breakers with weather proof receptacles mounted outside with a 20 Amp breaker with weatherproof boot
- Marine battery enclosure
- Spray on insulation for starter and battery connections
- Control panel with key switch for preheat, start and stop
- Automatic oil pressure and temperature shutdown
- Hour meter and volt meter
SILENCER
- Spark arrestor wrapped for heat insulation
SKID
- Fully galvanized steel channel frame
- Two forklift pockets
- Four point lifting eyes
DIMENSIONS - Length x Width x Height (In transport mode)
- Overall length: 133.5”
- Overall width: 48.25”
- Overall height: 58.75”
- Operating weight: 3010 lbs
DIMENSIONS - Length x Width x Height (In transport mode)
- Overall length: 133.5”
- Overall width: 48.25”
- Overall height: 58.75”
- Operating weight: 3010 lbs
We promise to keep all replacement parts in stock, to keep your business running at full capacity. Whether it's filters, cables, axle and brake parts or replacement components, only genuine Powko parts guarantee the safety, proper functioning and reliability of your equipment. Powko supplies quality original parts to protect your investment and our knowledgeable product specialists help ensure you receive exactly what you need to get your equipment back on the job.
For those who need those bulk prices on light tower parts, we offer these as well! We will assist you in finding manuals, keys, and all other parts! If you need information pertaining to an 1000 watt metal halide light fixture, other simiular fixtures, or even product maintenance questions, we are here for you! Call 1-866-609-6379 Lets turn those old broken down light towers into operable money making machines...
Call or Email with any question, we want to talk: 1-866-609-6379
Technicians are standing by to answer all your questions!
CLICK HERE to contact us
Powko backs all its products offered 100% with an extensive warranty plan. Our knowledgeable light tower technician are here to help make your warranty experience is as seamless as possible. Contact Us immediately if their is ever a need...
- Standard Powko Warranty
- Online Warranty Registration Form
- Online Warranty Claim Form
- POWKO Extended Service Protection Plan Offers 1-4 Years of
extended coverage* (Available on select light towers)
CLICK HERE to contact us
Warranty Responsibility: It is the responsibility and obligation of the purchaser to ask for, thoroughly read, and understand the light tower warranty prior to purchasing equipment. Failure to read and comprehend the warranty policy does not expose Powko Industries, LLC to any liabilities over and above the stated warranty bond. If you have any questions or need clarification of warranty details please contact sales@light-towers.com or call technical support at 866.609.6379
Copyright © 2011, All Rights Reserved Powko Industries, LLC.